35
Rigging Manual
1
2
9 - DISASSEMBLING AN ARRAY
Follow the steps in this chapter to safely disassemble an array. Although an SRX910LA is pictured in the chapter, the same steps should
be followed for an SRX906LA array.
STEPS:
• Safely lower the array to a workable height.
• Remove the stop pin from the bottom five cabinets and install them into their storage position in the handle. This enables the
bottom four cabinets to collapse back to the 12˚ position once the array is lowered to the ground.
• Attach the VT or Case to the bottom cabinet. Hook the rear arm to the bottom cabinets, install the stop pin, then lift the front
side of the VT or Case and attach the front two points.
9.1 LOWER THE ARRAY AND REMOVE THE STOP PINS
1
2
3
1
2
3
