25
Rigging Manual
A
B
C
A
B
C
A
B
C
A
B
C
7.3 ARRAY FRAME ATTACHMENT OPTIONS
The extension bars include three attachment positions for connection to an array, allowing for greater aiming resolution when an array is
suspended from a single point. In single-point applications, array aiming is determined by the shackle position on the extension bar. The
extension bars includes a good number of shackle positions, however the spacing is typically too coarse for precise sub-degree aiming,
and a shackle position is needed between two holes. The three attachment positions (A, B and C) allow for two additional shackle posi-
tions between holes, increasing the total shackle positions.
1
2
3
4
5
6
7
8
9
10
11 12 13 14 15
The example below shows how the real and “virtual” positions are spaced across the extension bar.
TIP:
Refer to JBL Line Array Calculator 3 software to determine the best shackle position and attachment combination to
achieve the required array angle.
16 17 18
