Main Information Display:
This display delivers messages and
status indications to help you operate the CS3/CS5 receiver.
1
Power On/Off (Standby):
Press the button once to turn the
CS3/CS5 receiver on, press it again to put the unit in the Standby
mode. Note that when the CS3/CS5 receiver is switched on, the
power indicator around the button turns blue.
2
Open/Close:
Press this button to open or close the disc tray.
3
USB On-the-Go Input:
This input may be used to temporarily
connect a USB thumb device or portable hard disk for direct play-
back of audio, image of video files or a USB hub. The USB inputs
are designed to power a single USB device at a time. If additional
hard disks are connected through a hub, it is necessary that addi-
tional external power supplies are used to power the hub and hard
disks.
4
Headphone Jack:
This jack may be used to listen to the
system’s output through a pair of headphones. Be certain that the
headphones have a standard 3.5mm stereo phone plug. Note that
the main room speakers will automatically be turned off when the
headphone jack is in use.
7
English
FRONT-PANEL CONTROLS
Main Information Display
1
Power On/Off (Standby)
2
Open/Close
3
USB On-the-Go Input
4
Headphone Jack
