manualshive.com logo in svg

JazzMutant Lemur, Owner'S Manual, Page: 56 / 96

Share
Download
JazzMutant Lemur Owner'S Manual Download Page 56

56

Monitor

The Monitor sends no data when you touch it. Its purpose is to display information sent
to the Lemur by your computer.

Variables

value

Represents the value of the Monitor to be displayed.

Dimensions

Minimum

50 pixels wide and 22 pixels high. The font size of the monitor is
adjusted as the object is resized.

General Properties

 Label

If checked, the object’s name is displayed above the value.

Value

The checkbox is not functional. The text field next to Value
represents the monitor’s default value. Since any value can be sent
to the monitor, there is no 0-1 limitation.

 Unit

If checked, appends fixed text to the end of the value display.

Precision

Number of floating-point digits that appear. A precision of 0
displays only the integer part of numbers the monitor receives.

Color

Drag the color bar to change the color of the label text. The
numerical value display is always white.

Behavior Properties

None.

Summary of Contents for Lemur

































































































Reviews:

No comments