manualshive.com logo in svg

JazzMutant Lemur, Owner'S Manual, Page: 24 / 96

Share
Download
JazzMutant Lemur Owner'S Manual Download Page 24

24

Interfaces  and  Objects

The JazzEditor application defines the interfaces and behavior of your Lemur. The
application functions largely identically on the Mac and Windows platform. With the
JazzEditor, you work with 

Projects

, which are XML files that contain the specification for

one or more 

Interfaces

 you will build out of 

Objects

.

In other words, Projects are the Lemur’s documents. You’ll save them to your computer’s
hard drive, and open them when you want to send them to the Lemur. We’ll discuss
Projects in more detail in the next chapter, but first, we want to get you started creating
Interfaces and Objects.

JazzEditor Overview

•

The 

Toolbar

 contains typical items you might find in an application’s File and Edit

menus, such as New, Open, Save, Undo and Redo. The Toolbar also contains
commands for configuring the Lemur.

•

The 

Project Browser

 provides a hierarchical view of your current project (interfaces,

objects, and expressions).

Summary of Contents for Lemur

































































































Reviews:

No comments