manualshive.com logo in svg

JazzMutant Lemur, Owner'S Manual, Page: 12 / 96

Share
Download
JazzMutant Lemur Owner'S Manual Download Page 12

12

The rear panel of the Lemur houses the power switch, power input jack, and Ethernet jack
with status lights.

Lemur System Overview

To use the Lemur you will need

•

an network connection from the LEMUR to a computer (running Mac OS X 10.2 or
later, or Windows XP). If you are connecting the Lemur directly to your computer,
please use the Ethernet cable supplied in your Lemur box.

You can also connect the LEMUR to your computer’s network using
routers and/or switches. See the 

Lemur Networks

 section below for details.

•

the JazzEditor software, which lets you create interfaces consisting of graphic objects
on your computer and store them in the LEMUR

•

a software application compatible with the OpenSoundControl protocol, such as
Max/MSP from Cycling ’74 or Reaktor from Native Instruments.

We’ll take you step by step through the process of getting your LEMUR up and running.
Please follow these instructions closely, especially if you are not experienced with
computer networking concepts.

Connect Up the Lemur

•

Plug in the Lemur using its supplied AC adaptor.

•

Turn on the power switch on the back of the Lemur. You should see the four buttons
on the top of the unit light up. After the startup sequence has finished, a yellow Lemur
should be visible on the screen.

Summary of Contents for Lemur

































































































Reviews:

No comments