![background image](http://html1.mh-extra.com/html/jayco/legacy-fifth-wheel-2009/legacy-fifth-wheel-2009_owners-manual_3653776075.webp)
SECTION 7
TOWING & HANDLING
63
To use the trailer plug, unlock the compartment
door and extend the wire harness, move the
hinged slider tab over and insert the wire
harness into the empty channel, then close and
lock the trailer plug compartment door.
Figure 3 Trailer plug compartment door slider tab
Trailer end of the 7-way plug
The trailer plug supplies power to the RV
brakes, tail lights, clearance lights, turn signals,
brake lights, etc. Wiring to operate your brakes
must be the same size in both the tow vehicle
and RV (the RV brake wiring is 12-gauge wire).
Figure 4 Trailer end (7-way plug) connector interior
7-way plug wiring code (trailer end)
White 1 Common
ground
Blue 2
Electric
brake
Green 3 Running/tail
lights
Black
4
Auxiliary battery charge (+)
Red 5
Stop/left
turn
Brown 6 Stop/right
turn
Yellow
7
Auxiliary/back up light
It should be noted that the center terminal is
labeled as an auxiliary circuit, most commonly
used for backup lights (not a ground terminal as
many try to make it).
Tow vehicle end of the 7-way plug
When attaching wires to your tow vehicle,
carefully and tightly tape all the connections
for moisture protection. On the tow vehicle
side, wire color alone should not be relied
on, always test and match the function to
the appropriate terminal.
Figure 5 Tow vehicle end (7-way plug) connector
7-way plug wiring code (tow vehicle end)
White 1
Common
ground
Blue 2
Electric
brake
Green 3 Running/tail
lights
Black
4
Auxiliary battery charge (+)
Red 5
Stop/left
turn
Brown 6 Stop/right
turn
Yellow
7
Auxiliary/back up lights
Maintenance
The connector plug may build up corrosion
with extended use and should be cleaned
periodically to insure good electrical contact.
Make sure the connector plug is kept clean
and protected from road elements as you
travel. When not in use, store the trailer plug
and cable, and lock the compartment door.
Generally speaking, RV's are wired to
match the connector colors. Any plug that
has been changed should be tested when
replacing for any reason to be sure the
function matches the terminal.
MOR/
RYDE
P
IN
B
OX
S
YSTEM
The MOR/ryde pin box system utilizes a
unique rubber shear spring to positively deal
with rough, towing road shock. The rubber
spring works in a horizontal planar motion
(in a longitudinal and lateral motion) to
absorb the towing shock. This allows the
Summary of Contents for Legacy Fifth Wheel 2009
