Jay electronique UC 323882G, Installation And User Technical Manual

Page: 93 / 164

DE
UC 323882G
-93-
EN FR
8- Servicing
BEFORE STARTING ANY SERVICING OPERATION, SWITCH
OFF THE MAIN POWER SUPPLY FOR THE SYSTEM
CONTROLLED.
Servicing the UCE transmitter :
- Housing of the UCE transmitter must not be opened. The UCE
can be dismanteld only be a trained staff, in a "controlled"
environment, spare parts can be changed only by identical parts.
- If one of the membranes of the function buttons or the seal of
the transmitter is damaged, the UCE must not be any more
used until replacement of these tightness spare parts.
In opposite case, any liquid, any dust or any foreign body can
damage the transmitter.
- The attention of the user is attracted to the risks of the use of the
remote control in an environment containing solvents of polymers
or glues which can degrade the good functioning of transmiiter
mechanical organs.
- Verify regularly the good state of the transmitter, paying a special
attention on the function button membranes, on the electronic key
connector and on the battery pack connector.
- Clean the transmitter by eliminating any foreign matter.
Only use non aggressive cleaning product on base of soapy
solution.