Jay electronique UC 323882G, Installation And User Technical Manual

Page: 88 / 164

DE
- 8 8 -
UC 323882G
EN FR
Transmitter state
(The transmitter stop
palmswitch is unlocked)
Red indicator
light
Green
indicator light
Function or corresponding
message
During attempt to program
"Dead man" duration or
radio channel or when
attempting to copy the
identity code
Alternate flashing Alternate flashing
Transmitter is locked.
Programming is required, see procedure in
§6.3.1 of UC technical manual.
Before or after "On/horn"
button is pressed
ON ON
No electronic key
Install electronic key on tranmitter before
powering up the transmitter
Before "On/horn" button is
pressed
Flashes 2 times Flashes 2 times
Electronic key is not valid
The electronic key is incompatible with the
UCE
After "On/horn" button is
pressed
Flashes 2 times Flashes 2 times
Electronic key is removed from the UCE
when transmitter is powered up
Before "On/horn" button is
pressed
Flashes 3 times Flashes 3 times
Identity code error
Mismatch detected between electronic key and
UCE memory.
Reprogramming is required, see procedure in
§6.3.4 of UC technical manual
Before or after "On/horn"
button is pressed
Flashes 4 times Flashes 4 times
-One or several function buttons are
defective
Or
-The button configuration is different from
that contained in the electronic and the
physical configuration on the transmitter
Before "On/horn" button is
pressed
Flashes 5 times Flashes 5 times
-Stop or start up error detected
Be sure to observe start up conditions specified
in §6.2 of UC technical manual
Or
-Transmitter stop palmswitch button faulty
Before "On/horn" button is
pressed
Flashes 6 times Flashes 6 times
-Stop or start up error detected
Be sure to observe start up conditions specified
in §6.2 of UC technical manual
Or
-Transmitter stop palmswitch button faulty
Before "On/horn" button is
pressed
Flashes 7 times Flashes 7 times
Internal electronic key error
Before "On/horn" button is
pressed
Flashes 8 times Flashes 8 times Internal UCE transmitter error
6.3.5- UCE transmitter indicator light functions
- Error messages
«Standby»