Javo Plus, User Manual

Page: 21 / 26

User Manual Javo Plus en Plus Extra Potmachine
Version 2015-1 20
7 Maintenance
Follow all instructions described in this manual, in particular chapter safety.
Maintenance of this machine must be performed in compliance with warnings on the machine and in
accordance with the user manual by qualified personnel.
Keep hands, hair, loose clothing and / or jewelry away from moving parts of the machine. Wear appropriate
clothing without loose parts. Wear non-slip work shoes.
As long as the machine is on, no connection or safety devices may be removed. The machine may only be
used when all protective devices and safety-related facilities are available and ready for use.
Always unplug the plug from the socket before starting maintenance. Wear personal protective equipment
(see section 2.3).
Inform operating personnel before start maintenance. Interrupt if possible the power (mains), before the
machine is investigated or maintained by turning off the main switch and locking it and pull the plug from
the socket. If work must be done with power supply (mains) voltage on the machine, work with an additional
person who can operate the emergency stop.
7.1 Required tools and equipment
A set of keys is included with the machine, consisting of:
A. Allan key 4 mm
B. Door key
C. Spanner 24-27mm
D. Spanner 17-19mm
E. Spanner 10-13mm
7.2 Preventive Maintenance
For the following maintenance instructions normal use is considered. With heavy use, or use under extreme
conditions, maintenance should be performed at shorter intervals.
Item 1x per... Comments
Machine Day After each daily use, spray with air to prevent pottrack jams etc.
Common places where substrate is: the pottrack, drill, drive of the drill
and the elevator.
Substrate bin Day Clear. See section "Empty substrate bin".
Elevator and belts Day Check tension. See section “Mounting, installation and commisioning”.
Elevator blades Day Clean. See section "Elevator Blades Cleaning".
Materials in the machine Day Remove trays or other material that has fallen into the machine before
starting the machine.
Drill unit 40 hours Lubricate. see section "Lubricate drill unit".
Greaseras 6 months Greaseras greasing: elevator bearing, driveshaft pottrack.
Safety components Week Test the safety circuit. See section “Test safety circuit”.
Pictograms Week Check readability and replace if necessary.
Electrical installation Year Check for damage.
Electric motors Year Remove dust.