User Manual Javo Plus en Plus Extra Potmachine
Version 2015-1
14
5.8
Set elevator and pottrack speed
Set the elevator and pottrack speed before you start working with the machine.
Potentiometers are mounted at the main cabinet or optional at
the workstation.
Procedure:
1.
Check the elevator speed. Adjust the speed in a way that
pots are filled sufficiently before they reach the brush.
2.
When the speed needs to be adjusted:
a.
Adjust the potentiometer for elevator speed with
potentiometer (A).
3.
Check the pottrack speed. Adjust the speed in a way that
pots are filled sufficiently and operated well.
4.
When the speed needs to be adjusted:
a.
Adjust the potentiometer for elevator speed with potentiometer (B).
5.9
Set brush height
Set the brush height before you start working with the machine.
The brush wiper controls the amount of soil on top of the pot.
Procedure:
1.
Check the brush height in comparison with the pot.
2.
When the speed needs to be adjusted:
a.
Loosen clamp (B).
b.
Set the desired brush height with crank (A).
i.
The more substrate on top of the pot, the stronger
the pressure plate of the drill will press down the
substrate in the pot.
c.
Tighten clamp (B).
5.10
Set substrate slide height
Set the height before you start working with the machine.
Adjust the height of the substrate slide so that there is not too much substrate
supplied by the substrate conveyor. Set the substrate slide as low as possible to
avoid accumulation of substrate in the machine. When changing from large to
small pots, the soil slide should be set lowered.
B
A
A
B
