User manual for Javo Plus M2.0
Version 22300779
page 9 / 27
3.6.
Controls
The motor is operated using the controls on the control panel, which are as follows:
A.
Stop button
B.
Start button
C.
Reset button
D.
Emergency stop
The following buttons and connections are mounted on/fitted to the electrical cabinet:
A.
Drill ON/OFF
B.
Pot track ON/OFF
C.
Elevator ON/OFF
D.
Stopped / error
E.
Main switch
F.
Pot dispenser continuous / non-continuous
G.
Timer ON/OFF
H.
Soil supply ON/OFF
I.
Main power socket IN
J.
Switched power socket OUT
K.
Constant power supply socket OUT (optional)
Speed control potentiometers (optional):
4.
Transport
Follow all the instructions given in this manual, in particular the instructions in the Safety Section.
On delivery, a Javo engineer must be present to unload the machine from the truck or wagon.
Do not move the machine until the power cable and compressed air line have been disconnected. Make sure that the
hoses and cables are stowed properly.
Check the machine's condition before moving the machine at the company's site (when it does not need to be
lifted). First check that the route is unobstructed so that the machine can be moved to the required position without
problems.
Contact your supplier when the machine needs to be lifted for transport away from the company site, or call a
professional shipping company.
Do not move the machine until the transport belt (take-off conveyor) has been removed. The machine must
be transported upright. The relative humidity must not be too high, so that there will be no condensation in the
machine.
Report any damage during or immediately after the delivery to the shipping company and to Nobels BV. Take all the
necessary measures to avoid further damage.
