Javad TRIUMPH-1, Operator'S Manual

Page: 21 / 162

Introduction
Getting Acquainted
TRIUMPH-1 Receiver
21
www.javad.com
The BT (Bluetooth) LED indicates the level of activity at the Bluetooth® wireless technology
communication link:
• Green – the Bluetooth® module is on and a connection has been established.
• Yellow – the Bluetooth® module is on and a connection is establishing.
• Red – connection is not established.
• No light – the Bluetooth® module is not active.
The MOD (modem) LED displays the status of the modem.
• Green – the UHF modem/GSM module is on and a connection has been established.
• Yellow – marginal connectivity.
• Red – connection is not established.
• No light – the UHF modem/ GSM module is not active.
The SAT (satellites) LED displays the number of tracked satellites.
• Green – eight and more satellites.
• Yellow – five to seven satellites.
• Red – less than five satellites.
• No light – no satellites.
Effective number of satellites are total number of satellites tracked minus the number of non-GPS
systems tracked. For example if 8 GPS and 5 GLONASS are tracked the effective number of
satellites is 12.
The POS (position) LED indicates position solution for current surveying mode:
• Green – Fixed/Diff position solution is obtained.
• Yellow – Float/No-Diff position solution is obtained.
• Red – No position.
• No light - no satellites.
The REC (record) LED displays the data recording status and blinks on each recording.
• Green – recording data.
• Yellow – less than 10 min memory left.
• Red – memory is full.
• No light - not active.
1. YGR - Yellow-green-red blinking means the LED blinks yellow, green, and red three times in a
second.
2. LED blinks 1 sec every 1 sec and the LED color indicates the battery status (see above).