Javad TRIUMPH-1, Operator'S Manual

Page: 20 / 162

Introduction
Getting Acquainted
TRIUMPH-1 Receiver
20
www.javad.com
MinPad
The MinPad is the receiver’s minimum interface used to display and control data input and output
(Figure 1-2).
Figure 1-2. TRIUMPH-1 MinPad
The BAT (battery) LED displays the power status for battery and receiver’s mode:
• No light - receiver is off/ no external power/sleep mode is off
• The LED color indicates the battery status:
• Green – full.
• Yellow – half.
• Red – almost empty.
The table below summarizes the BAT LED pattern:
Table 1-1. BAT LED Pattern
FN On/Off
BAT REC
BT
MOD SAT
POS
External power Receiver ON Sleep mode LED Pattern
No No No No light
No No Yes
YGR
1
rapid blinking every 10 sec, 8 sec of off gaps
No Yes No
LED solid according to the battery (green, yellow or red). See
battery status indication above
No Yes Yes YGR rapid blinking every 10 sec, 8 sec of solid according to battery
Yes No No
LED blinks
2
according to the battery
Yes No Yes YGR rapid blinking every 10 sec, 8 sec of blink according to battery
Yes Yes No
LED blinks
2
according to the battery
Yes Yes Yes YGR rapid blinking every 10 sec, 8 sec of blink according to battery