Command Line Interface
Identification and Diagnostics Commands
31
www.javad.com
4.6. RSS
The RSS command send to port the string: 00 0031 -85.7
Where: 0031 - the received Packets Number;
00 - the received Packets Number with bad Checksum;
-85.7 - RSSI (dBm) calculated along the last Packet;
After reading both the received Packets Number and the received Packets Number with bad Checksum
are cleaned.
4.7. RSSI
The RSSI command send to port RSSI (dBm) calculated along the last Packet.
4.8. RSSM
Modem stores the last RSSI values for each particular frequency on which a subpackage was received.
An array of the last RSSI for 128 possible frequencies can be read by command “rssm\n”.
4.9. RSSC
The command RSSC clears particular RSSI values
obtained by using the
command RSSM
to default
value -140.7 dBm.
4.10. RNSS
The command RNSS prints
last Noise Strength measured between Data Sabpackages
.
4.11. NSCN
The command NSCN allows to get the power of noise and interference for 128 frequencies from
902200000 to 927600000.
NSCN [
Parameters List
]
1
1 – Enable send to port the Number of the transmitted bytes.
Parameter List
Short Description
d
d – threshold, dB
