Command Line Interface
Modem Commands
25
www.javad.com
2.6. RGN
The RGN command is also responsible for configuring radio’s operation mode.
RGN [
Parameters List
]
The RGN command without parameter prints the Region number.
2.7. TRFC
The TRFC command is also responsible for configuring radio’s operation mode.
TRFC [
Parameters List
]
If the TRFC=1 each Data Packet is transmitted twice: first time on the current time and frequency, second
time on the next time and frequency position.
If TRFC=2 (“Transparent mode” On) two modems implement a “full duplex” - duplex transmission
mode in which data transfer maintained “simultaneously” with the reception of data
.
2.8. LSRT
The LSRT command is specific for USA and AUS region. It changes Link Simbol Rate.
LSRT [
Parameters List
]
Parameter List
Short Description
0
Sets EUR region
1
Sets USA region (a default setting)
2
Sets AUS region
Parameter List
Short Description
0
0 – Disable Packet repeating
1
1 – Enable Packet repeating (a default setting)
2
2 - Transparent mode
Parameter List
Short Description
0
64000 kHz (a default setting)
1
32000 kHz
2
16000 kHz
3
8000 kHz