Command Line Interface
Modem Commands
26
www.javad.com
The LSRT command without Parameter prints Link Symbol Rate parameter.
2.9. DCRC
The DCRC (“Data CRC”) command is manage the output of the received data to the port.
DCRC [
Parameters List
]
The DCRC command without Parameter prints DCRC parameter.
2.10. DLNG
The DLNG (“Data Subpackage Length”) command enables the validation of the receipted parameter -
length of subpackage.
DLNG [
Parameters List
]
The DLNG command without parameter prints DLNG parameter.
2.11. DSRV
The DSRV (“Data Service”) command allows the transmitter to control the tuning of the receiver. When
DSRV = 1 the receiver settings - FEC, SCRAM, TRFC - transmitted from the transmitter to the receiver
through the air.
DSRV [
Parameters List
]
The DSRV command without parameter prints DSRV parameter.
Parameter List
Short Description
0
0 - received data are distributed to the port,
regardless of the received data CRC. (a default setting)
1
1 - data are distributed to the port only if the CRC is correct.
Parameter List
Short Description
0
0 - validation of the receipted parameter length subpackage is not used.
(a default setting)
1
1 - validation of the parameter is used
Parameter List
Short Description
0
0 - the receiver's parameters are set from the configuration file. (a default setting)
1
1 – FEC, SCRAM, TRFC are set from service data passed to the receiver through the air.
