Jaton PowerPro VX, User Manual

Page: 37 / 73

System BIOS
33
Video Off After:
Select the saving mode in which the video is switched off.
Always On
The video will never be switched off in no saving mode.
All Modes Off
The video will be switched off in all saving modes.
Standby
The video will only be switched off in Standby or Suspend mode.
Suspend
The video will only be switched off in Suspend mode.
IDE HDD Power Down:
If the system has not accessed data on the hard disk drive during the specified time
period, the engine of the HDD will stop in order to save electricity.
You can set 1 to 15 minutes or select Disable according to your use of the HDD.
Doze Mode:
When the setting selected for "Power Management" is "User Define", you can
define for this mode any delay from 1 minute to 1 hour. If no power management
event occurs during this time period, meaning that computer is inactive during this
period, the system will enter the
Doze power saving mode.
If this mode is disabled, the system will enter the next mode in the sequence
(Standby or Suspend mode).
Standby Mode:
When the setting selected for "Power Management" is "User Define", you can
define for this mode any delay from 1 minute to 1 hour. If no power management
event occurs during this time period, meaning the computer is inactive during this
period, the system will enter the
Standby power saving mode.
If this mode is disabled, the system will enter the next mode in the sequence
(Suspend mode).