Jaton PowerPro VX, User Manual

Page: 43 / 73

System BIOS
39
“
Confirm Password:
“
Type your password again. When complete, press <Enter>. The password setting
is completed.
Password clearing procedure:
When you select the Password setting option, the following message is
displayed:
“
Enter Password:
“
Press <Enter>, the message
“
Password Disable
”
is displayed. Press a key. The
password clearing procedure is completed.
Notice: Do not forget your password. If you forget it, you will have to open the
computer case, clear the contents of the CMOS, and boot the system up
again. But doing this, you must reset all your settings.
IDE HDD AUTO DETECTION
After you have installed the hard disk, in old systems, you had to know the hard
disk specifications, such as the number of cylinders, heads and sectors, and to enter the
relevant information into the hard disk information section. If the CMOS data were
erased, and you had forgotten the hard disk specifications, it was a great problem. But
now, you can use this option to autodetect the hard disk type and specifications, and the
BIOS will automatically detect all the relevant information and place them in the Hard
Disk data section of the Standard CMOS Setup Menu, in order to allow you to use your
hard disk.