Jata JECP8523, Instructions Of Use

Page: 13 / 28

12 13
• It there still rests of water in the tank, it is due to the quality
controls made in our production line.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid any danger
INSTRUCTIONS OF USE
FILLING THE TANK AND IGNITION
• Set the temperature selector (4) to its maximum position (MAX) by turning it clockwise.
• Before filling the tank with water, set the steam lock (3) to the off position .
• To fill the tank (7), extract it by pulling it.
• Open the filling lid (8) and pour water into the tank.
• Do not go over the MAX indication of the tank (7) to avoid overflowing.
• Put the lid back in its original position and insert the tank (7) into the base of the steam station (6).
• Connect the iron to the network. The indicator (5) will light up.
• Once the pilot light (5) goes off, it will be ready to use.
IRONING WITH CONTINUOUS STEAM
• The temperature selector (4) must always be set to its maximum position (MAX).
• Press the steam button (2) to start the steam output.
• If continuous steam is desired, slide the continuous steam lock (3) forwards and it will not be necessary to
keep pressing the steam button (2).
• To stop the steam flowing, slide the constant steam lock (3) backwards.
VERTICAL IRONING
• It allows you to remove creases from the garments without them having to be lying on the ironing board:
jackets and coats may be pressed on their hangers; as may be hanging curtains and such.
• Press the steam button (2), slide the continuous steam lock (3) forwards and set the temperature selector
to the maximum position (MAX)
• Bring the iron close to the garment in a vertical position and press the steam button (2).
• DRY IRONING
• If you have water in the tank, place the continuous steam lock (3) backwards.
• Plug the iron into the mains and place the selector (4) in the desired temperature for each fabric:
- FIBRAS SINTÉTICAS : SINTHETIC FIBRES: Low temperature (•)
- SEDA – LANA : SILK – WOOL: Medium temperature (••)
- ALGODÓN – LINO : COTTON – LINEN: High temperature (•••- MAX)