Jason International, Inc. •
501.771.4477
Page 17 of 24
Customer Service : 800.255.5766
Copyright © 2013 Jason International.
Figure 9
SIGNATURE EDITION AIRMASSEUR
®
TOUCHPAD
The Jason Signature Edition Digital AirMasseur
®
touchpad is used to access all
of the functions of the control box used in a Jason Signature Edition AirMasseur
®
bath.
Customized Settings
The 12 character LCD display can be customized
by pressing the Blower and Blower Speeds icons
simultaneously for five (5) seconds, while the system is
Off.
note:
The Blower Speeds icon will not be illuminated
during this process. Use the above figure to locate the
icon. A menu (see below) will be displayed to choose the
following: Purge 24, (starts the blower every 24 hours for
two (2) minutes at the time the purge was set); Product
Test Diagnostics (see below); Temperature (Fahrenheit or
Celsius); and Language (English or Spanish).
Menu Instructions
Use the Blower icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option.
For example, press and release the Blower icon to change
from Purge 24 to Product Test; press and release again to
arrive at the Temperature option. Then press and release
the Blower Speeds icon to change the temperature display
from F (Fahrenheit) to C (Celsius).
Product Test Diagnostics
After selecting the Product Test option from the menu,
the unit will perform a series of tests to confirm correct
installation of components. The test will begin by displaying
the configuration number, followed by the software revision
number. Next, the display will test the Temperature and
Low Water Level sensor (ITW-209). Next, each of the six
(6) icons will begin to light. Press the illuminated icon to
proceed to the next icon. After the icon test, the blower will
start for two (2) seconds on the High setting. Lastly, the
LED Light unit will be tested. If you receive an error on any
of the tests, confirm proper installation of the component
to the correct control box. (See the CONTROL BOX
CONNECTIONS section).
Remote Control
The Signature Edition control system includes a waterproof
floating Universal Remote Control. It controls all bath
functions plus a TV, DVD, CD, etc. which can be heard
through the optional Sound Immersion Transducers
(optional).
Blower On/Off, Modes
Blower Speeds
LED Light
IR for Remote
OPERATING INSTRUCTIONS, FEATURES, AND CONTROLS (cont.)
OPERATING INSTRUCTIONS
Blower On/Off and Modes Icon
To control the operation of the blower, simply press and
release to change the setting to Constant, Wave, Pulse
or Off. A 20 minute decreasing timer will be initiated when
the blower motor starts. Press and hold the Blower icon to
cycle though blower modes. The Blower icon should remain
lit as long as the bath is connected to a power supply. The
LCD will display “Const Air” and blower speed, “Wave Air”
and blower speed, or “Pulse Air” and blower speed, while
the key is pressed. The time remaining on the purge cycle
is displayed after the bath has drained. “Purge Stop” is
displayed while the key is pressed during the purge cycle.
This action will terminate the purge cycle. The mode settings
will be remembered on the next startup.
Blower Speeds Icon
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the
key in Wave and Pulse mode to go from High to Medium
and Medium to High. The system remembers the last speed
setting on the next startup. The Blower Speeds icon will light
up when the blower is running. The LED displays the blower
speed from “10” (Low) or “55"(Med) to “99” (High) while the
key is pressed. You can reduce the auto purge idle time
from 20 minutes to 10 minutes, by pressing and holding the
key for more than 5-seconds during the purge idle period.
LED Light Icon
Hold the icon for less than two (2) seconds to turn the lights
Off or On. Hold the icon for more than two (2) seconds to
change modes. The Light icon should remain lit as long as
the bath is connected to a power supply. This function has a
two (2) hour timer and remembers the last mode. The LCD
displays “Light On” or “Light Off” while the icon is pressed
for less than two (2) seconds. “Light Cycle” is displayed if
pressed for more than two (2) seconds.
