Jasic EVOLVE 200, User Manual

Page: 29 / 56

EVOLVE 200 USER MANUAL
27
Table 2.1: TECHNICAL PARAMETER MENU IN TIG MODE
MODE 2T 4T SP (spot)
TIG STD - pre gas
-Time Slope up
-Time Slope down
- post gas
-I start
-I stop
Time start
Time stop - pre gas
-I start
-Slope up
-Slope down
-I stop
Post gas
Glick - pre gas
-I start
-Slope up
Time start
Time stop-
Slope down
-I stop
- Post gas
Time Spot
TIG PULSE
MAN
- pre gas
-I start
-Slope up
Time start
Time stop
-Slope down
-I stop-
post gas
-Pulse BALANCE
-Pulse I low
-SOFTNESS
frequency - pre gas
-I start
-Slope up
-Slope down
-I stop
post gas
-Pulse BALANCE
-Pulse I low
-Pulse frequency
Glick - pre gas
-I start
-Slope up
Time start
Time stop
-Slope down
-I stop
-Pulse BALANCE
-Pulse I low
-Pulse frequency
Time Spot
TIG PULSE SYN - pre gas - pre gas - pre gas
TIG MIX pre gas
-I start
-Slope up
Time start
Time stop
-Slope down
-I stop-T-stop
post gas
-Pulse BALANCE
-Pulse I low
-SOFTNESS
frequency pre gas
-I start
-Slope up
-Slope down
-I stop
post gas
-Pulse BALANCE
-Pulse I low
-Pulse frequency
Glick -pre gas
-I start
-Slope up
Time start
Time stop
-Slope down
-I stop
-Pulse BALANCE
-Pulse I low
-Pulse frequency
Time Spot
NOTE: if the “Timer Slope Up” is set to OFF, the other parameters for the ramp setting (timer start, I start,
Slope down Time stop, I stop) will be hide.