Jasic EVOLVE 200, User Manual

Page: 37 / 56

EVOLVE 200 USER MANUAL
35
Set the wire speed by KNOB1 (left knob).
In the central and right side, the display shows the arc voltage.
Set the arc voltage by KNOB2 (right knob).
2.8.5 MIG synergic mode setting
Press the PROG button to enter in the MYG TYPE menu.
Select the SYNERGIC MODE by KNOB1 and confirm by
pushing the KNOB1.
The material, diameter of wire, and gas are as the latest MIG
setting.
Use the procedure to set the MATERIAL, WIRE diameter and
GAS
Set the 2T/4T by 2T/4T button.
Select 2T/4T type by rotating KNOB1 and confirm by pressing
the KNOB1.
In this case, the 4 time 2T/4T is selected.
SETTING MENU
Push the SETTING button to enter in the setting menu.
SELECT the sub menu by knob1 and confirm by pushing the
knob1.
- Technical Parameter (See Table 2.2)
- JOB menu: select the job
- MACHINE INFO: can show the machine SN and more
information.
- RESTORE FACTORY: restore default settings of the working data in the selected welding section.