Jasic EVOLVE 200, User Manual

Page: 4 / 56

EVOLVE 200 USER MANUAL
2
1.1 Conformity declaration
IN CASE OF BAD OPERATION YOU DEMAND THE ATTENDANCE OF QUALIFIED STAFF
The equipment doesn’t comply with EN/ IEC 61000-3-12.
The installer or the user must be sure that it can be connected to the public low voltage power line, if necessary, in consultation with
the network distributor
.
1.1.1 Re2T/4T Norm
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
1.1.2 Safety Precautions
WELDING AND ARC CUTTING CAN BE HARMFUL TO YOURSELF AND OTHERS. The user must
therefore be educated against the hazards, summarized below, deriving from welding operations.
ELECTRIC SHOCK – May be fatal.
Install and earth the welding machine according to the applicable regulations.
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing. Isolate
yourselves from both the earth and the workpiece.
Make sure your working position is safe.
FUME AND GASES – May be hazardous to your health.
Keep your head away from fumes.
Work in the presence of adequate ventilation, and use ventilators around the arc to prevent
fume and gases from forming in the work area.
ARC RAYS – May injure the eyes and burn the skin.
Protect your eyes with welding masks fitted with filtered lenses, and protect your body with
appropriate safety garments.
Protect others by installing adequate shields or curtains.