Jasic EVO 2.0 EP-45, Operator'S Manual

Page: 13 / 50

13
TECHNICAL SPECIFICATIONS
* When using the EP - 45SC via a portable transformer, please ensure that you use a suitably sized 115v
transformer or the add - on compressor start up performance will be impacted.
Please Note
Due to variations in manufactured products all claimed performance ratings, capacities, measurements,
dimensions and weights quoted are approximate only. Achievable performance and ratings when in use
can depend upon correct installation, applications and use along with regular maintenance and service.
Parameter Unit Jasic Arc EP - 45 PFC Jasic Arc EP - 45SC PFC
Rated input (U1) V & Hz AC 95 ~ 265V 50/60 AC 95 ~ 265V 50/60
Rated input current (Ieff)
A
115V - 20
230V - 11.5
115V - 26
230V - 15
Rated input current (Imax)
A
115V - 31
230V - 23
115V - 37
230V - 27
Rated input power
kVA
115V - 3.6
230V - 5.3
115V - 10 *
230V - 6.2
Cutting current range
A
115V - 20 ~ 30
230V - 20 ~ 45
115V - 20 ~ 30
230V - 20 ~ 45
Rated operating voltage V
115V - 92
230V - 98
115V - 92
230V - 98
Rated duty cycle (X)
(rated at 40°C)
%
30A @ 25% 45A @ 25%
Clean cut mm
115V - 6
230V - 15
115V - 5
230V - 12
Severance cut mm
115V - 12
230V - 22
115V - 10
230V - 20
Pierce cut mm
115V - 4
230V - 12
115V - 3
230V - 10
No load voltage (OCV) (U
0
) V 300 300
Plasma Torch - IPT60 (6m) IPT60 (6m)
Pilot Arc start mode V Non HF Non HF
Efficiency % 86 86
Idle state power W < 50 < 50
Power factor cos φ 0.99 0.99
Standard - EN60974 - 1 EN60974 - 1
Protection class IP IP23S IP23S
Insulation class - H H
Noise Db < 110 < 110
Operating temperature range °C - 10 ~ +40 - 10 ~ +40
Storage temperature °C - 25 ~ +55 - 25 ~ +55
Size (with handle) mm 546 x 166 x 341 547 x 187 x 558
Net weight Kg 10 26.6
Overall weight Kg 14.5 33.6