8
USE OF PRODUCT
RECEIVING AND UNPACKING
The OptiCell 2 NX air mattress is delivered rolled up
in cardboard. Use of knives should be avoided when
unpacking and handling due to risk of damage.
An OptiCell air mattress system contains:
• 1 pump
• 1 power cable (6 meters)
• 1 mattress, with air hose cable, CPR valve and OptiTex cover
Check that the product is not damaged. In the event of transport damage, see page 17.
The mattress can be set in place and made ready for use immediately.
PLEASE NOTE:
• The air pump should not be used in humid areas nor should it be left outdoors in damp
weather conditions. If the pump is exposed to water, avoid handling it until it has dried.
• Take care when handling the pump, power cable and air hoses. Air hoses can be pinched
and damaged by bed rails etc.
• The mattress’s comfort and function change depending on its air pressure in relation to the
patient’s weight. Keep in mind that a tall patient can weigh the same as a short patient, but
may need a different pressure. This must always be carefully observed for each patient.
• The biggest risk for the patient is to “bottom out” on the mattress. The basic rule is that the
part of the body to be unburdened must not be subject to pressure. If the patient “bottoms
out”, the objective of the mattress is lost. See page 11 for information on the Hand Check test.
• The patient should not be positioned with their respiratory system turned towards the
mattress.
It is important that no sharp objects come in contact with the mattress.
To prevent damage to the mattress avoid knives, keys and other objects with a
cutting or puncturing ability from coming into contact with the mattress.
STORAGE
The OptiCell 2 NX air mattress system should be stored in the dry and at room temperature.
We recommend that the mattress be kept rolled up in one of our optional transport bags.
The mattress should not be treated carelessly when stored, as it risks being damaged.
Avoid exposing the mattress to direct sunlight for prolonged periods.
