82
GENERAL LUBRICATION
Lubricate the points shown below in accordance with the
Periodic Maintenance Schedule or whenever the vehicle has been
operated in wet or rainy conditions. Before lubricating, clean the area
of any grease, oil, or grime. After applying the lubricant, thoroughly
wipe any excess lubricant from the surrounding area and any painted
surfaces with a clean rag.
Apply oil to the following pivots (Janus recommends the use of
Spectro aerosol “101” Lubricant and Penetrant):
1. Rear brake pedal pivot
2. Front brake lever
3. Clutch lever
4. Side stand
5. Front fork swing-arm pivots.
6. The clutch inner cable upper end should be lubricated and serviced
by a qualified motorcycle mechanic.
7. The throttle inner cable upper end should be lubricated and
serviced by a qualified motorcycle mechanic.
Apply grease to the following points:
8. Speedometer cable lower connection should be lubricated and
serviced by a qualified motorcycle mechanic.
WARNING: Care should be taken to keep lubricants off the tires
and brake rotors or pads. If lubricants come in contact with these
parts it will greatly reduce their ability to function properly and
may increase traction and stopping distances, potentially leading
to loss of control and an accident.
Summary of Contents for 250 Series
