Janome CoverPro 3000, Instruction Book

Page: 38 / 49

35
End of the seam with thread chain
z
Stop sewing at the end of the work fabric.
Turn the stitch length dial to 4 and start the machine
to slowly produce approximately 5" (12 cm) of thread
chain while gently pulling the thread chain to the back.
q
Stitch length dial
q
4
w
z
x
NOTE:
Turn the stitch length dial to 4 when sewing the triple
cover stitch.
x
Cut the thread chain with the thread cutter as shown,
leaving a thread chain approximately 2˝ (5 cm) long
on the end of the fabric.
w
Thread cutter