Janome CoverPro 3000, Instruction Book

Page: 22 / 49

19
r
t
z
x
c
w
e
q
R
M
L
Built-in Needle Threader
Thread the needles with the built-in needle threader.
z
Turn the handwheel toward you to match the mark on
the machine with the setting mark on the handwheel.
q
Handwheel
w
Mark
e
Setting mark
x
Lower the presser foot lifter.
r
Presser foot lifter
c
L: Set the needle threader switch lever to L when
threading the left needle.
M: Set the needle threader switch lever to M when
threading the center needle.
R: Set the needle threader switch lever to R when
threading the right needle.
t
Needle threader switch lever
CAUTION:
Turn off the power switch before threading the
machine.
Make sure the top cover stitch spreader is stored to
the machine when using the built-in needle threader
(refer to page 38) .
NOTE:
Do not use #30 or thicker threads.