janitza UMG 96-S2, User Manual And Technical Data

Page: 44 / 66

UMG 96-S2 www.janitza.com
44
14. Measured value display and automatic display change profile
14.1 Measured value displays
After a return of power, the device shows the first
measured value display from the measured value
display profile 1 (standard setting).
In order to keep the selection of measured
value displays manageable, the device sorts the
measured value displays and thus the measured
values into profiles.
The device provides 3 measured value display
profiles with different arrangements of measured
value displays. The measured value display profile is
selected in the parameter address 037.
The measured values included in the measured
value display profiles appear one by one when the
key is pressed.
Measured value display profile (parameter
address 037)
Parameter
setting
Profiles
0 Measured value display profile 1
(standard setting).
1 Measured value display profile 2.
2 Measured value display profile 3.
Tab. Profile setting
NOTE
An overview of the measured value display
profiles can be found in chap.„14.4 Overview of
measured value displays - display profile 1-3“
on page 46.
14.2 Automatic display change profile
All measured value displays can be called up by
the device once per second. Alternatively to the
measured value display profile mentioned above
and calling up the measured values by pressing
a key, an automatically changing measured value
display can also be set on the device.
In order to keep the selection of measured values
manageable, the device also sorts the measured
values for the automatic display change into profiles.
To activate the automatic display change profile,
program a changeover time >0 in the parameter
address 039 of the device.
If a key is pressed between the automatic display
change, the next measured value display stored in
the profile appears. If the key is pressed repeatedly,
you will scroll between the measured values stored
in the selected display change profile.
If no key is pressed for 60 s, the device switches
back to the automatic display change.
Changeover time (parameter address 039)
Parameter
setting
Changeover time
0 Automatic display change deactivated
(standard setting).
1 .. 60 Changeover time in seconds.
Applies for all automatic display
change profiles.
Tab. Automatic changeover time setting
Display change profile (parameter address 038)
Parameter
setting
Display change profile
0 Measured value display profile 1
(standard setting).
1 Measured value display profile 2.
2 Measured value display profile 3.
Tab. Display change profile setting
NOTE
An overview of the automatic display change
profiles can be found in chap.„14.5 Overview of
automatic display change profiles 1-3“ on page
50.
14.3 Programming measured value displays via
the GridVis
®
software.
The GridVis
®
software offers a clear presentation
and a convenient method for configuring measured
value displays.
In order to use the GridVis
®
software, connect your
device to a PC via the serial interface (RS485) (see
chap. „8. Connection“ on page 27).
NOTE
The measured value display profiles and the
display change profile are easily configured via
the GridVis
®
network visualization software.