janitza UMG 96-S2, User Manual And Technical Data

Page: 6 / 66

UMG 96-S2 www.janitza.com
6
13. Commissioning 42
13. 1 Connecting the supply voltage 42
13. 2 Connecting the measured voltage 42
13. 3 Connecting the measured current 42
13. 4 Checking the phase sequence 42
13. 5 Checking the phase assignment 42
13. 6 Checking the power measurement 42
13. 7 Checking the measurement 42
13. 8 Checking the individual powers 43
13. 9 Checking the sum powers 43
14. Measured value display and automatic display change profile 44
14. 1 Measured value displays 44
14. 2 Automatic display change profile 44
14. 3 Programming measured value displays via the GridVis
®
software. 44
14. 4 Overview of measured value displays - display profile 1-3 46
14. 5 Overview of automatic display change profiles 1-3 50
15. Connection example 52
16. Service and maintenance 54
16. 1 Repair and calibration 54
16. 2 Front film and display 54
16. 3 Device adjustment 54
16. 4 Firmware update 54
16. 5 Service 54
17. Error messages 55
17. 1 Warnings 55
17. 2 Serious errors
55
17. 3 Internal error cause recognition 55
17. 4 Exceeding the measurement range 56
17. 5 Measurement range exceedance parameter 56
17. 6 Procedure in the event of errors 57
18. Technical data 58
18. 1 Function characteristics 60
18. 2 Parameter and Modbus address list 62
18. 3 Table 1 - Parameter list 62
18. 4 Table 2 - Modbus address list (excerpt of the frequently required measured values) 63
18. 5 Number formats 64
18. 6 Note on saving measured values and configuration data 64
19. Dimensional drawings 65