janitza UMG 96-S2, User Manual And Technical Data

Page: 14 / 66

UMG 96-S2 www.janitza.com
14
3.7 EC declaration of conformity
The EC declaration of conformity and the
accompanying CE mark indicates that Janitza
electronics GmbH has manufactured the device
according to the directives and standards which
apply for the device.
The laws, standards and directives applied for
the devices by Janitza electronics GmbH can
be found in the EC declaration of conformity at
www.janitza.com.
3.8 Scope of delivery
Num-
ber
Item no. Designation
1 52.34.001 UMG 96-S2
1 33.03.372 Installation instructions DE/EN
1 33.03.371 GridVis
®
software quick start DE/EN
1 33.03.342 Safety instructions
2 29.01.036 Mounting brackets
(snap-on mounting brackets)
1 10.01.919 Screw-type terminal, pluggable,
2-pole (supply voltage)
1 10.01.917 Screw-type terminal, pluggable,
4-pole (voltage measurement)
1 10.01.921 Screw-type terminal, pluggable,
6-pole (current measurement)
1 10.01.915 Screw-type terminal, pluggable,
3-pole (RS485)
1 10.01.923 Screw-type terminal, pluggable,
2-pole (digital output)
Upon delivery, the device has the required
screw-type terminals.
3.9 Available accessories
Num-
ber
Item no. Designation
1 29.01.065 Silicone seal, 96 x 96 mm
2 52.22.251 Mounting brackets
(screw clamps)
1 15.06.025 Interface converter
RS485 <-> USB
1 15.06.015 Interface converter
RS485 <-> RS232
1 52.00.008 RS485 termination resistor,
120 Ω
3.10 Measurement method
The device measures
·seamlessly and calculates all effective values
via a 10/12 period interval.
·the true effective value (TRMS) of the voltages
and currents generated at the measurement
inputs.
3.11 Operating concept
There are several options for programming the
device or reading out measured values, e.g. via
·2 keys on the device.
·the GridVis
® software.
·the RS485 interface with the Modbus protocol.
Data can be changed and called up with the
Modbus address list (excerpt in chap. 18.2 on
page 62 or as a download at www.janitza.com).
This user manual only describes the operation of
the device via the 2 keys. The GridVis
® software
has its own “Online help”.
3.12 GridVis network analysis software
The perfect tool for programming and reading out
measurement data is available to you with the
GridVis
®
software (download at www.janitza.com).
Performance features of the GridVis
®
software
·Programming the device.
·Graphic presentation of the measured values.
Connection to the PC
Connections for the communication between
the PC and device can be found in chap.
„8. Connection“ on page 27.