UMG 96-S2
www.janitza.com
10
2. Safety
The safety chapter contain notes that must be
observed for your personal safety and to prevent
property damage.
2.1 Presentation of warning notices and
safety instructions
The warning notices listed below
·can be found in the complete documentation.
·can be found on the devices themselves.
·point out potential risks and dangers.
·confirm information which clarifies or simplifies
procedures.
The additional symbol on the device itself
indicates an electrical danger that can result in
serious injuries or death.
The general warning symbol calls attention
to possible risks of injury. Observe all the
instructions listed under this symbol in order to
prevent injuries or even death.
2.2 Danger levels
Warning notices and safety instructions are
highlighted by a warning symbol and the danger
levels are presented as follows depending on the
level of risk:
DANGER
Indicates an imminently dangerous situation
that will result in serious or fatal injuries in the
event of noncompliance.
WARNING
Indicates an imminently dangerous situation
that can result in serious or fatal injuries in the
event of noncompliance.
CAUTION
Indicates an imminently dangerous situation
that can result in minor injuries in the event of
noncompliance.
ATTENTION
Indicates an imminently dangerous situation
that can result in property damage or environ-
mental damage in the event of noncompliance.
NOTE
Points out procedures during which a danger of
injuries or property damage does
not
exist.
2.3 Product safety
The device corresponds to the state of the art
and complies with the generally accepted safety
rules; nevertheless, dangers may arise.
Observe the safety requirements and warning
notices. Failure to observe the notices can result
in personal injury and/or damage to the product.
Any impermissible modification or use of this
device
·exceeding the specified mechanical, electrical
or other operating limits can result in personal
injury and/or damage to the product.
·applies as "misuse" and/or "negligence" with
respect to the product warranty and thus
voids the warranty for coverage of potentially
resulting damages.
Read and understand the user manual before
installation, operation, maintenance and use of
the device.
Only operate the device in flawless condition
in compliance with this user manual and the
accompanying documents. Send defective
devices back to the manufacturer taking into
consideration the transport conditions.
Keep the user manual through the entire service
life of the device and always have it readily
available for reference.
Also observe the applicable legal and safety
requirements for your system for the respective
application when using the device.
2.4 Dangers when handling the device
When operating electrical devices, specific parts
of these devices can carry dangerous voltage.
Therefore, property damage and personal injuries
up to death can occur if they are not handled
correctly.
Summary of Contents for UMG 96-S2
