janitza UMG 96 RM, Operating Instructions And Technical Data

Page: 52 / 104

52
UMG 96RM
Time recording
The UMG 96RM records the operating hours and the
total running time of each comparator
• where the time of operating hours is measured with
a resolution of 0.1 h and is displayed in hours or
• the total running time of the comparator is represented
in seconds (when 999999 seconds is reached,
the display changes to hours).
For the querying of measured value displays, the times
are marked with the numbers 1 to 6:
none = operating hours meter
1 = total running time, comparator 1A
2 = total running time, comparator 2A
3 = total running time, comparator 1B
4 = total running time, comparator 2B
5 = total running time, comparator 1C
6 = total running time, comparator 2C
A maximum of 99999.9 h (= 11.4 years) can be shown
on the measured value display.
Fig. Operating hours meter of
the measured value display
The UMG 96RM shows the
number 140.8 h in the ope-
rating hours meter. This cor-
responds to 140 hours and
80 industrial minutes. 100 in-
dustrial minutes correspond
to 60 minutes. In this example,
80 industrial minutes therefore
represent 48 minutes.
Operating hours meter
The operating hours meter measures the time for which
the UMG 96RM records and displays measured values.
The time of operating hours is measured with a resolution
of 0.1 h and is displayed in hours. The operating hours
meter cannot be reset.
Total running time of the comparator
The total running time of a comparator is the sum
of all time for which there is a limit value violation
in the comparator result.
The total running time of the comparator can only
be reset via the GridVis software. The reset is carried out
for all total running times.