manualshive.com logo in svg

janitza UMG 96 RM, Operating Instructions And Technical Data, Page: 67 / 104

Share
Download
janitza UMG 96 RM Operating Instructions And Technical Data Download Page 67

67

UMG 96RM

Comparator

Two comparator groups, each with 
3 comparators, are available for 
monitoring limit values. The results 
from comparators A, B and C can 
be AND or OR linked. 

The linkage result from comparator 
group 1 can be assigned to digital 
output 1 and the linkage result from 
comparator group 2 is assigned 
to digital output 2.

Only 3-digit parameter addresses can be 
entered in the UMG 96RM.
4-digit parameter addresses can be entered 
in the GridVis.

C

We recommend making settings for limit 
value monitoring via the GridVis.

C

Measured value (addr. 110)
Limit value (addr. 108)
Minimum turn-on time (addr. 111)
Lead time (addr. 112)
Operator ">=", "<" (addr. 113)

Comparator A

Measured value (addr. 116)
Limit value (addr. 114)
Minimum turn-on time (addr. 117)
Lead time (addr. 118)
Operator ">=", "<" (addr. 119)

Comparator B

Measured value (addr. 122)
Limit value (addr. 120)
Minimum turn-on time (addr. 123)
Lead time (addr. 124)
Operator ">=", "<" (addr. 125)

Comparator C

Comparator result (addr. 610)

Comparator result (addr. 611)

Comparator result (addr. 612)

Total running time

(addr. 5078)

Total running time

(addr. 5080)

Total running time

(addr. 5082)

Link the results from comparators A, B and C

Link the results from comparators A, B and C as AND or OR (addr. 107).

Comparator group 1

Linkage result (addr. 616)

Summary of Contents for UMG 96 RM









































































































Reviews:

No comments