janitza UMG 96 RM, Operating Instructions And Technical Data, Page: 90 / 104

90
UMG 96RM
Table 2 - Modbus address list
(frequently used measured values)
19000 808 float RD V Voltage L1-N
19002 810 float RD V Voltage L2-N
19004 812 float RD V Voltage L3-N
19006 814 float RD V Voltage L1-L2
19008 816 float RD V Voltage L2-L3
19010 818 float RD V Voltage L3-L1
19012 860 float RD A Current, L1
19014 862 float RD A Current, L2
19016 864 float RD A Current, L3
19018 866 float RD A Vector sum; IN=I1+I2+I3
19020 868 float RD W Real power L1
19022 870 float RD W Real power L2
19024 872 float RD W Real power L3
19026 874 float RD W Sum; Psum3=P1+P2+P3
19028 884 float RD VA Apparent power S L1
19030 886 float RD VA Apparent power S L2
19032 888 float RD VA Apparent power S L3
19034 890 float RD VA Sum; Ssum3=S1+S2+S3
Modbus Address
Address
Above display Format RD/WR Unit Note
C
A complete overview of the parameters and
measured values is given in the "Modbus
Address List" document on the CD or on
the Internet.
C
The addresses in the range from 0-999
listed in this document can be adjusted
directly on the device. The address range
over 1,000 can only be edited via Modbus!