janitza UMG 96 RM, Operating Instructions And Technical Data

Page: 36 / 104

36
UMG 96RM
Parameters and measured values
All parameters necessary for operating the UMG 96RM,
e.g. the current transformer data, and a selection of
frequently required measured values are stored in the
table.
The contents of most addresses can be accessed via
the serial interface and the buttons on the UMG 96RM.
Only the first 3 significant digits of a value can be entered
on the device. Values with more digits can be entered
using GridVis.
The device always only displays the first 3 significant
digits of a value.
Selected measured values are summarised in measured
value display profiles and can be shown in display mode
using buttons 1 and 2.
The current measured value display profile, the current
display change profile and date and time can only be
read and changed via the RS485 interface.
Example of the parameter display
On the UMG 96RM display
the value "001" is shown as
the content of address "000".
This parameter reflects the
device address (here "001")
of the UMG 96RM on a bus
in list form.
Example of the measured
value display
In this example, the UMG 96RM
display shows the voltages L
to N with 230 V each.
The K1 and K2 transistor out-
puts are conductive and cur-
rent can flow.