janitza UMG 96 RM-M, User Manual And Technical Data

Page: 34 / 112

34
UMG 96RM-M
Operation
The UMG 96RM-M is operated using buttons 1 and
2. Measured values and programming data appears
on a liquid crystal display.
A distinction is made between display mode and pro-
gramming mode. The accidental changing of program-
ming data is prevented by the entry of a password.
Display mode
In the display mode, you can scroll between
the programmed measured value displays using
buttons 1 and 2. All factory-set measured value displays
listed in section 1 can be called up. Up to three measured
values are displayed per measured value display.
The measured value relaying allows select measured
value displays to be shown alternately after a settable
changeover time.
Programming mode
In the programming mode, the settings required
for operating the UMG 96RM-M can be displayed
and changed. Pressing buttons 1 and 2 simultaneously
for about one second calls up the programming mode
after the password prompt. If no user password was
programmed, the user arrives directly in the first
programming menu. Programming mode is indicated
by the text “PRG” on the display.
Button 2 can now be used to switch between
the following programming menus:
- current transformer,
- voltage transformer,
- parameter list.
If the device is in programming mode and no button has
been pressed for approximately 60 seconds or if buttons
1 and 2 are pressed simultaneously for approx. one sec-
ond, the UMG 96RM-M returns to display mode.