janitza UMG 96-PA User Manual Download Page 57

Page: 57 / 85

www.janitza.de

UMG 96-PA

Timer output

In the device, 64 independent weekly timers
can be set with:

• a resolution of 1 minute.
• a freely defined active period within one

day. The active day within the week can be
selected.

Example:
9:25 to 11:45 on Sunday, Monday and Friday

The weekly timers can be configured as

• tariff converters (1 and 2)
• Set the digital outputs 1 to 3
• as "inoperable

." The status can always be queried via the
Modbus. The statuses of the timers are linked
via an "OR" operator at the digital output.

The weekly timers can be configured using
the GridVis® software in the "

Timer

" configu-

ration area)

Fig. Configuration of the weekly timer via the GridVis

software

Output for Modbus remote

Enables switching of the outputs via a Mod-
bus address.

This function can be configured via the Grid-
Vis® software:

• Open the device configuration in GridVis®.
• Set the mode for the digital outputs under

Periphery

" to "

Modbus remote output

• Determine the output polarity with:

- Current flow when active (closer)
- Current flow when inactive (opener)

Fig. Configuration of the digital outputs as "Modbus
remote" in the GridVis

software

Summary of Contents for UMG 96-PA






















































































Search results

Summary of Contents for UMG 96-PA

Reviews:

Related manuals for UMG 96-PA

Brands by name

Popular brands

janitza UMG 96-PA, User Manual

Search results

Summary of Contents for UMG 96-PA

Reviews:

Related manuals for UMG 96-PA

Brands by name

Popular brands