UMG 804
www.janitza.com
8
1. General information
1.1
Disclaimer
It is essential that the information products for the
devices are observed to ensure safe operation and
achieve the specified performance characteristics
and product features.
Janitza electronics GmbH assumes no liability for
personal injuries, property damage and financial
losses resulting from the failure to observe the
information products.
Make sure that your information products are
legible and accessible.
1.2
Copyright notice
© 2019 - Janitza electronics GmbH - Lahnau.
All rights reserved.
Any duplication, processing, distribution and any
other kind of use, even in part, is prohibited.
All trademarks and any resulting rights belong to
the respective holders of these rights.
1.3
Technical changes
·Make sure that the user manual matches your
device.
·First, make sure you have read and understood
the document accompanying the product.
·Keep the documents accompanying the product
accessible through its service life and hand them
over to the subsequent owner where applicable.
·Refer to www.janitza.com for information
concerning device revisions and the associated
adjustments to the documentation accompanying
the product.
1.4
About this user manual
Please send us any questions, comments or
suggestions for improvement about the user
manual via e-mail to [email protected].
1.5
Defective device/disposal
Send
defective devices
back to the manufacturer
for inspection (complete with accessories). Do
not attempt to independently open or repair the
device since otherwise the warranty claim will
expire!
Please observe the national regulations for the
disposal
! Dispose of individual parts, where
necessary, depending on the properties and
existing country-specific regulations, e.g. as:
·Electronic waste
·Batteries and accumulators
·Plastic
·Metal
or commission a certified disposal company with
the scrapping.
2. Safety
The safety chapter contain notes that must be
observed for your personal safety and to prevent
property damage.
2.1
Presentation of warning notices and
safety instructions
The warning notices listed below
·can be found in the complete documentation.
·can be found on the devices themselves.
·point out potential risks and dangers.
·confirm information which clarifies or simplifies
procedures.
The additional symbol on the device itself
indicates an electrical danger that can
result in serious injuries or death.
The general warning symbol calls
attention to possible risks of injury.
Observe all the instructions listed under
this symbol in order to prevent injuries or
even death.
Summary of Contents for UMG 804
Page 11: ...www janitza com UMG 804 11...