janitza UMG 804, User Manual And Technical Data, Page: 7 / 40

www.janitza.com UMG 804
7
10. 4 Cable Ports and Circuit Designation 22
10. 5 Discovery of CT Interface Card by the Core Module 23
11. Solid Core CT Strips Interface Board Installation 24
12. Placement and Orientation of Solid Core CT Strips 26
12. 1 Channel Allocation Tables 27
12. 2 Mounting Instructions: 18mm Strip 29
12. 3 Mounting Instructions: 0.75” CT Strip 29
12. 4 Connection of Auxiliary CT Terminals 30
12. 5 Connection of Auxiliary CT Terminals 30
13. Connection of CT Strips to Smart Ports 31
13. 1 Discovery of CT Strips by the Core Module 31
14. Voltage Input / Electrical Connections 32
14. 1 Acceptable wiring configurations 33
15. Serial Communications 33
16. Ethernet Communications 34
17. Configuration of Core Module Settings 35
17. 1 Configuration Methods 35
17. 1. 1 Configuring via the USB Interface using the spreadsheet application 35
17. 1. 2 Configuring via the Onboard Web Console 36
17. 1. 3 Configuring via direct Modification of the CSV file 40
Subject to technical changes.
The content of our documentation has been compiled with the utmost care and is based on the latest
information available to us. Nevertheless, we would like to point out that the updating of this document
cannot always be performed simultaneously with the further technical development of our products.
Information and specifications can be changed at any time.
Please consult
www.janitza.com
for information on the current version.
The English version is the original version of the documentation.