
12
UMG 103
B
A
Operating concept
The UMG103 is programmed and read out via the RS485 interface only. The device
address is directly set via 2 coding switches.
GridVis programming software
The UMG103 can be programmed and read out using the GridVis programming
software included in the scope of supply. To this end the UMG103 must be connected
to a PC via the RS485 interface.
GridVis features
- Programming the UMG103
- Storing data in a database
- Graphic display of measured values.
Connection
Current
measurement
Red LED
Green LED
Connection of
the measurement
and power supply
voltage
RS485
interface
Setting the
device address
Fig.: View of the UMG103.