![background image](http://html1.mh-extra.com/html/janitza/800-con/800-con_user-manual-and-technical-data_3318468019.webp)
www.janitza.com
19
800-CON Modules
4.3 Connections/controls on 800-CON module
1
2
1
2
3
3
Item Designation
Description
1
Screw terminals, 8-pole
Output or input module
2
Screw terminals, 8-pole
Output or input module
3
JanBus interface -
rear of module
Connection sockets for the bus connector (note output/input!)
4
Transfer module
output bus connector
Plug for insertion into the basic device or an attached module
5
Transfer module
output bus connector
Connector for insertion into the rear of the module
6
Transfer module
input bus connector
Connector for insertion into the rear of the module
7
Transfer module
input bus connector
Sockets for module insertion
INFORMATION
The transfer modules (800-CON) of the set of 2 are
suitable as output or input modules!
However, make sure to mount the correct bus con-
nectors (output and input)!
Always mount components of your JanBus system
from the output bus connector to the input bus
connector. This will avoid an incorrect connection of
remote JanBus systems! Cf. Sect. “5.1 Data transfer
with 800-CON module” on p. 22.
INFORMATION
The transfer modules are supplied with the neces-
sary screw terminals and bus connectors (JanBus
interface) for connection to the basic device or other
modules.
6
5
7
4