Jands Vista T4, User Manual

Page: 218 / 308

Network preferences The Console control panel
N
If you are using a S or M series control surface the network settings are controlled
by the
To set the networking preferences, on a T or I series console click the Network
settings button on the Settings screen:
etwork preferences
PC operating system.
does this… This option…
Host name used to identify the console when using tracking Is
backup.
DHCP / Static IP Sets the console to either obtain an IP address from a
DHCP server or use a Static IP as set below
IP Address IP address of the Vista console, e.g. Sets the
192.168.0.65
IP Netmask P address, e.g. Sets the subnet mask for the I
255.255.255.0
Default Gateway Sets default gateway for the console. Used when the
destination address bis outside the local subnet.
13 ‐ 4 Vista User Guide, Version 2