Jands Vista T4, User Manual

Page: 206 / 308

Group Masters Using the console hardware
Wi th th is Group type you can do this…
Scale ( + )
ter
Increase the intensity of fixtures in the group. When a
Scale(+) fader is pushed up, while a cuelist is being
played, the intensity of fixtures in that group will be
increased.
also known as an
Additive group mas
When a Scale(+) flash button is pressed the intensity
of fixtures in that group will go to 100%.
HTP
Highest takes
precedence Control the the intensity of fixtures in the group on
an HTP basis. If there’s no cuelist, containing the
fixtures in the group, being played the fader will set
or
the level of the fixtures between 0 and 100%.
This is the default fader and flash button setting f
groups.
u
1.
2.
ebar.
3.
action and drag it on top of the button
ction.
Group
Yo can assign different actions to these buttons and faders to suit your
requirements or playback style.
To assign an action:
Click the Console button to display the Console screen.
Click on the ‘Group Faders’ or ‘Group Buttons’ tab in the sid
Click on the required fader or button
or fader you want to use for that fun
The following actions are available:
Buttons
The following fader actions are available:
This button action … does this…
Blank The button has no action.
Select Selects the group.
Flash ( - ) ressed the intensity
of fixtures in that group will go to the level
When a Flash(-) flash button is p
programmed in the active cuelist.
Flash ( + )
When a Flash(+) flash button is pressed the intensity
of fixtures in that group will go to 100%.
11 ‐ 20 Vista User Guide, Version 2