Jands Vista T4, User Manual

Page: 102 / 308

Using a keypad in the programmer window The Chooser window
This button… does this…
G Group
S Store All (Look)
P Store Part
T Time
Selecting fixtures t
For simple fixture sele
you can also select Groups and Fix
numbers with a ‘G’
for Group or ‘F’ f fi
For example:
•
1 + 5 + 10 Enter selects fixtures 1, 5 and 10
plus
the CLI
You can also set levels with the keyboard. To simplify operation Vista
s some entries.
digits are interpreted as tens (@5 is the same as @ 50).
s.
ns
ts it to 5%.
•
1 @ 5 Enter selects fixture 1 and sets it to 50%.
in he CLI.
ctions you can just type the fixtures numbers. However
tures by prefacing the ID
or xture.
•
G1 + F20 Enter selects all the fixtures in group 1
fixture 20.
•
1 / 10 – 4 / 6 Enter selects fixtures 1, 2, 3, 7, 8, 9 and 10
Selecting fixtures and setting levels in
automatically complete
For fixture ‘through’ selections leaving off the second number means all higher
numbered fixtures will be selected.
For intensities single
Number.
Setting ‘though’ levels can also fan intensitie
For example:
•
1 / 10 @ 50 Enter selects fixtures 1 through 10 and sets
them to 50%
•
1 / 10 @ @ selects fixtures 1 through 10 and sets them to
100%
•
1 / 3 @ 20 / 100 Enter selects fixtures 1 through 3 and fa
their intensities between 20 and 100% (fixture 1=20%,
fixture 2=60%, and fixture 3=100%)
•
10 > @ 9 Enter selects all fixtures 10 and above and sets
them to 90%
•
1 @ 05 Enter selects fixture 1 and se
5 ‐ 52 Vista User Guide, Version 2