Jands Vista T4, User Manual

Page: 169 / 308

SmartFX Effect controls
This option… does this…
O fset
ase offset)
adjusting the Offset value, rolls the waveshape
within its own window. For example a 0% Phase
offset for a sine waveform would start and end at f
(Ph
You can adjust the offset of a feature by either
or entering a
een 0 and 360 in the offset field
the midpoint while a 25% Phase offset would have
the sinusoid start & end at the high point.
dragging in the waveform window
value betw
+ Add Click the + icon to add a new effect type that is
synchronised with the other features(s) in this
effect.
- Delete effect feature. Click the - icon to delete the selected
Basepoint sets what happens when fixtures that are running
an effect receive a new setting for the same feature
type. For example if a circle position effect is
cue runs that sets
those fixtures to a different position.
tops
If the basepoint is set to Free the effect continues to
t will take it’s basepoint from the new event.
- Bound
- Free
running on a set of fixture and a
If the basepoint is set to Bound the effect s
running.
run bu
Vista User Guide, Version 2 7 ‐ 11