J&E Hall JEHSD-0400-B3-M-3, Technical Manual

Page: 22 / 44

Issue: 01.08.2020
Commissioning
Switch Unit ON / OFF (By Controller)
1. With controller Home screen displayed, Press PRG button to go Main Menu screen and select “A. On/Off Unit”
2. Press ENTER button. Screen A01 is displayed.
3. Press ENTER button to move cursor from home position to SWITCH OFF value. Switch Unit ON by using UP/DOWN
arrows. Press ENTER button to confirm.
4. Press ESC button repeatedly to return to Home Screen. This should now show ON by KEY at the bottom of the screen.
5. The unit will start up following a short delay (assuming all conditions for compressor start
Switch Unit ON / OFF (By Controller)
displayed, Press PRG button to go Main Menu screen and select “A. On/Off Unit”
Press ENTER button. Screen A01 is displayed.
Press ENTER button to move cursor from home position to SWITCH OFF value. Switch Unit ON by using UP/DOWN
ENTER button to confirm.
Press ESC button repeatedly to return to Home Screen. This should now show ON by KEY at the bottom of the screen.
The unit will start up following a short delay (assuming all conditions for compressor start-
Page 22
displayed, Press PRG button to go Main Menu screen and select “A. On/Off Unit”
Press ENTER button to move cursor from home position to SWITCH OFF value. Switch Unit ON by using UP/DOWN
Press ESC button repeatedly to return to Home Screen. This should now show ON by KEY at the bottom of the screen.
-up are met).