J&E Hall JEHSD-0400-B3-M-3, Technical Manual

Page: 13 / 44

Issue: 01.08.2020 Page 13
Installation
Unit location
•
In order to achieve maximum cooling capacity, the installation location for the condensing unit should be carefully selected.
•
Install the condensing unit in such a way so that hot air ejected by the condensing unit cannot be drawn in again (short circuit
of hot discharge air). Allow sufficient space for maintenance around the unit.
•
Ensure that there is no obstruction to air flow into or out of the unit. Remove obstacles which block air intake or discharge.
•
The location must be well ventilated, so the unit can draw in and distribute plenty of air thus lowering the condensing
temperature.
•
To optimize the unit running conditions, the condenser coil must be cleaned at regular intervals.
•
The unit must be level in all directions.
Installation clearances
•
The installation location should allow sufficient space for air flow and maintenance around the unit.
X
X