IS297-22F
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Page 18/27
How to use the Stabilizing Chain Harness to Hang Fan:
• On each leg of the Stabilizing Chain Harness measure 1’ from the corner and attach another
quick connect, as shown below.
• These quick connects will be used to attach the hanging chains at the proper location on the
Stabilizing Chain Harness.
31
OSHA requires this fan to
be mounted a minimum of
7’ above the floor.
Must be mounted a minimum
of 2’ below the ceiling
NOTE: Consideration of the height of frequently used
machinery should be taken into account to
avoid damage and inconvenience.
4 Louver Mounting Height Recommendations:
33
Weight 350lbs
Site Requirements:
• Structure, additional hanging chain, and anchor hardware (not provided) must be
rated for 350lbs
32
1’
